24/48H EXPRESS (working days) AND FREE SHIPMENTS* (check contract terms)
0
WARCHAL TIMBRE VIOLIN D STRING
Using all the knowledge and experience, the Warchal Timbre string set is the best version manufactured to date by this company. It combines gut-like sound and response with the added projection and stability typically offered by synthetic strings.
Place your order through info@luthiervidal.com
Information and features
- Reference
- CUVIWATIM3RE
- Outer string material
- Hydronalium-Silver
- Core string material
- Synthetic
- Size
- 4/4
- Tension
- Medium
- String end
- Tailpiece end
- Peg end
- Warranty
- Inspect your strings immediately upon receipt. Installed strings are not returnable, unless they break within the first 30 days after purchase.
Description
What qualities will Warchal Timbre set bring to your violin?
- The D string projects well and responds clearly at every dynamic. Hydronalium is not used in the outer winding which means that there isn't a problem with corrosion caused by perspiration. The set is well balanced and there is no drop in projection on the D string.
The Warchal Timbre set is distributed only by a select network of luthiers and repairers.
String break-in time of only 12 minutes.
Though we have tried our best to give you a short string break-in time, we also need your help to enable the strings to reach their ultimate sound quality.
After fitting Timbre strings we suggest that you play for 10 minutes using moderate dynamics. You may need to retune your strings several (six to eight) times during this time.
If you find that the sound of the W-Core strings (G, D and A strings) is warm but perhaps a little dull, or lacking in power and brilliance, then this can easily be rectified in a few seconds.
Play four full strokes of the bow on each string close to the bridge using a fortissimo dynamics. Ideally you should use a slightly slanting but not tilted bowing angle as shown in the diagram.
Write your review